3 replies
by dporter8463 Accepted solution
by hal 9000 Accepted solution
You can try clearing BIOS and see if that will give you the default On Board Video.
No Guarantee that it will work but when the M'Board breaks down it's about the only alternative available.
Col
by norehca Accepted solution
so you have no display? I would say try clearing the BIOS. To do this you need to mess with some jumpers. Usually closest to the battery will be 3 prongs. With the power cable unplugged switching the cap over to the secnd and third prongs for 10 seconds will clear the CMOS. Then put the cap back on prongs 1 and 2.
If your display works up to WIndows booting then put your old video card back in and before taking it out ths time uninstall and drivers for it and remove it from the device manager. Right click my computer, properties, hardware tab, device manager.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending