Discussion Locked

NT 4 Server start up error problems

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
im new ti IT and was at a large finance corp today. 1 of there NT4 server was displaying an error message 05bf on boot up. after post and bios routines but before nt boot. does anyone have any ideas

5 replies

by hayes1015

Try updating the BIOS.

Write down the bios version number that comes up during boot up and also write down the model of the mainboard. Go to the manufactures website and search for an updated version.

Hope this helps.

GH

by admin-stuart

If this error displays immediately after the NTDETECT message, it could be a faulty device driver, try a reboot and when the boot menu displays, select VGA mode, see if the error shows up as before. If not, you might start with removing and reinstalling the video driver, or examine any possible recent hardware updates or changes.

Look at the System and Application Event Logs to see if this error is recorded and additional info provided there. Good Luck.

This discussion is closed to new replies.