Discussion Locked

NT Blue Screen of Death

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I accidentally installed the NT option pack 4 to NT work station. It was trying to install IIS instead of PWS. The workstation gave me BSOD in the middle of installation. The error code is 0x00000077, Kernel_stack_inpage_error. After I reboot, it looks OK, but as soon as I tried to log in, it just hangs. I tried to use emergency disks to do a recovery, and tried to use set up disks to exam boot sector, but nothing works. There are two drives, the primary drive is 2.4gig with NTFS file format. The secondary drive is a 6.0gig with NTFS format.
I am just wondering if it can be saved at all. Thank you.

5 replies

by pvp

I would try reinstalling NT and select "repair existing installation."

That should save most of what you had, and with any luck, get rid of any parts of IIS that almost got installed.

I think I'd also get another copy of NTOP4, since I don't recall an option to install IIS on a WS. (I've done this with W95, NT4WS and NT4Server.) I don't recall it making bad guesses as to the OS and allowing incompatible installs, so your NTOP4 might be corrupted.

by agcdesby

Thank you for your answer. It turned out that one of the hard drives was corrupted. After removing the hard drive, the system was operational. I didn't get chance to reinstall the NT.

by tamj123

The error code 0x00000077, ususally relate to hareware problem, I suggest remove and replace hardware part one at time, to test make sure it still function.

hope this help.

by agcdesby

Thank you for your answer. The support person decided to get ride of the PC, and later he found out that one of the hard drives was corrupted.

This discussion is closed to new replies.