Discussion Locked

NT - NetZero to Local ISP - Problems

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've got a home user running Windows NT. They've been working from home through our internet web-site and connecting to the internet via NetZero's free interent service. They're not getting too much use to continue NetZero and are signing on with a local ISP, but they can't get things working right. I've talked with the ISP and they've sited an issue with NetZero putting something in the registry that affects TCP/IP routing (this is getting in over my head a bit), thus preventing the user from getting to ANY web pages. Anyway, they (ISP) know how to fix this on 95/98, but don't have a clue for NT. I've gotten nothing useful from NetZero. I've also search Microsoft's site, but haven't had any luck. The ISP (SpearNet) is just a straight dial-in ISP no special software or anything.

If anyone could offer any advice on this I would greatly appreciate it.

3 replies

by edward clint

Word to the wise, net-zero is to be avoided.

I personally do not have experience with NetZero but I have heard enough such stories.(I have used Juno free, with a slight hack so I dont have to use their app, or see any ads)

Anyway... if NZ indeed has screwed with your TCP/IP, it seems to me the simplest, easiest fix may be to reinstall TCP/IP protocol.
Just go in to your network config and be sure to write down all the details, IP, gateway, DNS's etc.., then rip out the TCPIP protocol itself, re-install and re config. It only takes about 10 minutes max.

This might not work for you if you have additional TCP stack complications like VPN software or AOL(god help you), or something, reply if that is the case.

Also, sometimes NT and win98 are extremely similar registry-wise(there is a techrep. article on this https://www.techrepublic.com/article.jhtml?id=r00320010319pos01.htm). It is possible, the procedure is the same on NT as 98, even if NZ does not know it. So if you have documented how-to-remove NZ from win98 registry, it might be fruitful to back up your NT registry, and look around, and see if the same keys/values are not there. If you are not experienced with registry surfing(editing), skip this option.

good luck

-Ed

by derrick_frease

Thanks for the response Ed! I've played around with your suggestions and a thousand other suggestions and haven't had any luck what so ever. I think I'm gonna try to find an ISP with a little more NT-experienced tech support. Hopefully they will be able to get us through.

Thanks Again,

D.

This discussion is closed to new replies.