Discussion Locked

NT/ Printer

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

NT network environment, 4-5 workstations and the server are having problems printing. I checked the settings, spooler and nothing seems out of place. If I try to print a test page directly from the server I get an "Unknown error".
I'm thinking at this point if MS doesn't know, how the heck would I!?

7 replies

by naamor

I would start with basic troubleshooting.
1. Verify that the printer itself is working. Try printing to it through the LPT port.
2. Verify network connectivity
3. Verify that the NIC in the printer is working properly.
4. Check that the driver is not corrupt.
5. Insure that the printer is setup properly on the network. i.e. No IP address conflicts, shareing is enabled.

Good luck

by Former member

What machine is the printer physically attached to?

This discussion is closed to new replies.