Discussion Locked

NT script won't run from Windows 98

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I can't get my domain logon script to run from my Windows 98 machine. It runs fine from my Windows NT 4.0 workstation with the same user name. The script is being replicated from the PDC to all the BDCs so I know that's not the problem. Any ideas?

8 replies

by shmaltz

Sorry, but Chris is WRONG. Logon scripts do work with win9x. What you have to do is as follows:
Make sure the primery windows logon in network control panel is setup to "Client For Microsoft Networks". Next make sure that in client for microsoft networks properties in network control panel the check box "Log On To Windows NT Domain" is checked and you give the domain to logon to. once this is done you should have no problems with the logon script.
BTW this is also the only way system policy will work on a windows 9x machine.

by zedic

I have the Client for Microsoft Networks as my primery logon. I can logon from the win98 machine as the same user that works on a winNT machine. I can logon the NT domain just fine but the logon script doesn't run.

by craig it mangaer

One note I will add to this which may be your problem. The question I would ask is if the WIN98 machine is even logging on to the network. Win98 has a "bug" for lack of a better term that when you set it up prior to connecting to the network and no password is set for the initial install user that you will not be prompted for a username and password after that no matter how hard you try. I have had to reinstall the OS to fix. If this isn't the issue and you are using .bat files you should be fine and it could be a hardware issue on the win98 machine though that's a long shot.

by zedic

YES, The win98 machine is logging on the Windows NT 4.0 Domain! The logon script that I set up only runs from ANY winNT machine and not from ANY win98 machines. I'm using the same user name so I know it's not a right's issue also.

by zedic

The script is a .bat file and is a simple drive map as follows:
net use U: \\computer\share

This discussion is closed to new replies.