Discussion Locked

NT Server 4.0

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I do not understand from the server when I tried pinging a workstation using IP or hostname I can connect to it with no problem,however, when I tried to access it through the network neighborhood icon I can see all the workstations but when I tried to double click on each one of them I get an error message "path cannot be found". I check the network configuration, everything seems fine(IP addresss, SNM, default gateway, domain name, DNS, WINS, Services, and Network ID). I tried to map to it butwith no luck, "path cannot be found". ANY SUGGESTION? Thanks! Remember I can see all the workstations but I cannot access it and I have all the Administrator permissions including Enterprise...

7 replies

by mckaytech

This can happen if you have a corrupted WINS database or one that fails to replicate properly. It can also happen if you have 'browser wars' going on between different servers and workstations.

A couple of Resource Kit utilities that can be helpful in figuring out the cause are browstat and browmon for analyzing the browser system and winschk for analyzing the WINS system.

It's a name resolution issue rather than a permissions issue so WINS, browsing and perhaps DNS (in unusual circumstances like cases in which the DNS name and the NetBios name for the same machine are different) are the places to look. Typically a permissions issue will give a message of "access denied" or something similar.

paul

by poo_music

It might be the Master Browser Issues. Do check wheather the Master Broswer server is register in the Wins server

by bhrdwh

My thinking is that WINS Database is corrupted Uninstall WINS from your Server, reintall service again & start off by switchig on PDC first, then your DHCP Server, then your WINS Server, then all other systems.
Hope this helps.
Akash

This discussion is closed to new replies.