11 replies
by tbradley
I don't know why they're not showing up in NW neighborhood, but there is a workaround.
If you know the printers absolute name
//pauls_comp/hp895c etc
you can manually type this into the port line instead of browsing for the printer.
by kcouch
by essamk
by kcouch
by ajdelo
You may want to check that the NetBEUI protocol is bound to "File and Printer sharing for Microsoft Networks".
Right click on Network Neighborhood-> Properties-> NetBEUI Properties-> make sure that the check box by File and Printer sharing is checked.
by kcouch
by dcho
by kcouch
by compute2u
Since you can't see the workstation/s under network, i would suggest one of the following;
if one printer is involved.
1. uninstall the printer on the workstation
and let the drivers remain. Re-install the printer and print a test page. Set it up to share and go to the computer that can't find it and add a network printer. see if it is there now. THIS WORKS IF SOMEONE RESET OR CHANGED THE BIOS SETTINGS FOR THE PPORT.
(B-Dir to ECP or EPP. You might also see two references for the same printer under the printers folder.
If more than one printer workstation is involved; goto control panel>network, double click on the tcp/ip line for the netcard. click on all seven tabs and click OK. If you don't have the .cab files on your computer you will be asked for windows and the the computer will verify/update settings and reboot. then check for printers present.
by kcouch
by kcouch
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending