Discussion Locked

NT Server OptionPack Installation Error

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
When I installed the NT4 server option pack, I received the following message to abort the installation. Initialization error of DLL file: Initialization error occurred on the file WINNT\system32\KERNEL32.dll. I would like to know how to fix this problem to install the option pack to upgrade the IIS from version 3 to version 4 on a NT4 server.

6 replies

by davieboy

lets start with the basics ok..

see if all the hardware you are using is on the HCL. wiz thge hardware components are supported by the HCL. make sure, all the devices have drivers.

when it has mentioned the initialisation error it means that WINNT\system32\KERNEL32.dll this file is wither missing or corrupted. this is common problem. though not many people deal with this problem sensibly. the first step involves using the erd. you can use the resourse in the ERD (emergency repair disk) and replace the missing or the corrupted file.
you choose the repair option .

if it still doesnt work then back up all your drives , format the volume and reinstall winnt . the chances are, if there is a hardware problem , you may still get the error. if the problem was with the prevous installation then, you call in the hardware expert. the chances of the H/W problems are 50 %.
all the best.

keep me posted if it worked.
David Brainard

by weirong_w_lue

The ERD does not help. The system was reinstalled and tested with the same problem. The service pack is not an issue either.

by lintadsl

Simpe question for you,
what Service Pack running?
Have you install the newest SP verson?

Sunny

by weirong_w_lue

Point value changed by question poster. The error message was posted by the "sysocmgr.exe" program in the option pack.

This discussion is closed to new replies.