Discussion Locked

NT2NT, best migration tactic

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I need to migrate 7 antiquated servers to 5 new Dell 4300 PowerEdge servers. I need to know what would be the best method or way to go about migrating the services over to the new equipment. Should i configure the new servers, put them online as BDC's and synchronize the entire domain thereby creating the information needed on the new servers, then promoting the BDC to PDC thus completing the task? Or should i back-up the PDC and BDC on tape and just run the tape on the new servers. Is there another way which is less painful that doesn't require technical difficulty that would get the job done in a timely manner.

1 reply

by deltree

This sounds like a perfect opportunity to develope an ideal server structure.
Are you operating on a LAN or a WAN? If it is a LAN, then I would recommend a PDC, a BDC, and the rest member servers.

If the servers are at remote sites, then all BDC's and one PDC are appropriate.

In either approach, the best method is a staged method. Build one box as a BDC in the existing domain. Promote it to PDC.

From here, there is no way around the technical difficulty of this project.
If all youare running is file and print services, then your project is not too difficult.
If you are running applications and databases, then it becomes more challenging (painful).

I would start with DHCP service.
Next would be the WINS/DNS services.
Print services.
File services.
Application services.
Database services.

Sounds like a fun project.
Good Luck!
I'll be happy to discuss this further if you are interested.

This discussion is closed to new replies.