Discussion Locked

NT4 can't read A: on install ??

0 helpful
18 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Install program needs to read A: for a software key, installing from E:\, zip on D:,Nt4,SP6a,LanDesk,AutoCad....

18 replies

by techdictator

Can you boot off a DOS diskette? You might want to check BIOS to see if the floppy is disabled or the BIOS has some kind of funky antivirus mode for the floppy drive.

by merc457

can boot from dos diskette, no disability in the bios of drive and,or, virus checking......

by merc457

NT Workstation, I just ran C2 & removable media drives are not are not allocated at logon.

by philando

If you're fine on the hardware level (Bios), then maybe the OS has problem with the drive controller. Does the A: show up in "MY COMPUTER"? Check devices in control panel to make sure driver or service is started. Also, always use NT's event log; that should always be your starting point.
Good Luck

by techdictator

Ok, couple of clarifying questions: Can you read other floppies in the drive of the NT4 box in question? Can you read the floppy in question on another computer? Check the devices control panel applet and see if the floppy device has started. Ifnot, look at the event log and see why not. Lastly, go through the whole process of installing the application on another computer and then install the license and see if that works. You should probably do this on a machine that can be wiped clean. Have you called techsupport for the application vendor yet? If so, what did they say?

by merc457

Yes, can read other floppies, and can read and install program on another computer. Device log say that floppy is started at boot and ok. Vendor Tech Support says it is because the CD & floppy cannot see each other.

by merc457

It now appears that A: is being read, but the key cannot access the volume C: to implement the key. On boot-up, the blue screen following NT loader, the message reads that it "cannot access the volume".

by techdictator

You should run chkdsk from within Windows NT to fix the C drive. If you can't you should get a 3rd party utility like Winternals chkdsk for DOS.

by merc457

chkdsk from within Windows NT does not fix the C drive, Winternals is not in budget at this time. Any 30 day trial, or shareware programs that would also work ???

by techdictator

Sorry, and I've looked long and hard when my company's exchange server went down. If you're a Windows NT shop then you really do need such a utility. They're not horribly priced either. Visit http://www.atl-datarecovery.com Their utility is very thorough. Not too expensive either (<$200).

by merc457

Thanx for all your help, all

Till I can get the utility, guess I'll have to live with it..........

This discussion is closed to new replies.