Discussion Locked

NT4 PDC Joining Another Domain

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have two PDC's from different domains on the same network. I want to change the domain of one of the PDC's and get it to act as a BDC for the original PDC. Basicaly get these PDC's to share a common Domain with one acting as a BDC to the other.

17 replies

by ndellasala

Without any unforseen problems within the network, your answer is a simple one. First, right-click on the network neighborhood icon on the desktop of the pdc whose domain is being changed. On the identification tab click the change button. Renamethe domain the same name as the Original PDC. Now all you have to do it access server manager and do the promoting or demoting of the machine that will be the PDC/the BDC. Godd luck

by snapp1337

You will have to rebuild the PDC and make it a member of the new domain. Or there is a utility out there called U-Tools that will allow you to demote a domain controller. Either one of these options will work. Good luck

Lindsey
lsnapp@uhhg.org

by mjrebholz

The PDC cannot change to being another domain's BDC directly. That server will have probably have to be reinstalled. There is a technote detailing how to rename an entire domain, Q178009 which you should read first, and it's a big job. I would definitely recommend a off-network test first, or the ramifications could be considerable.

Regards

by dc1

This would require that you rebuild your PDC and reinstall it as a BDC to the other PDC. All workstations and accounts would have to be recreated in the new domain.

by frobo

Hi Joe,

their is no way for NT 4.0 PDC to join a other Domain ! You have to reinstall this Server as an BDC of your favourite Domain.
IF you care about User and Machine Accounts so you can use the Domain Migration Administrator from NetIQ.

This Tools is very mighty, you can :
Migrate NT 4.0 --> NT 4.0
Migrate NT 4.0 --> W2k
Migrate W2k --> W2k Inter- and Intraforest.

Look at www.NetIQ.COM

Hope it Helps

Frobo

by curlergirl

Joe, you can do this by synchronizing the SID of the PDC you want to move with the SID of the PDC in the domain you want to move it into. This is NOT supported by Microsoft, but you can do it using a SID changer called NewSID from www.sysinternals.com (it's free - go to the web site and download it, read the instructional material carefully). I've done this myself and it did work. Hope this helps!

by umbral-echo

You can merge and restructure your two Windows NT 4.0 domains into a single domain IF you migrate to Windows 2000.

You cannot do what you want to do in Windows NT 4.0 under any circumstance. Once a PDC or BDC is installed it gets a domain SID (big random number) that all the domain controllers for that domian share. Two domains, two SIDs and renaming the domain will just cause a name conflict to occur. The two domain SIDs must have different names.

If you can affort to migrate, the ruleschange. A Windows 2000 domain in Native mode can have a SIDHistory which maintains the old SIDs so you don't lose access to resources. You can take two separate domains with two separate SIDs and join them into a single domain with one SID so long as the domain is a Windows 2000 Native mode domain.

by umbral-echo

Those utilities mentioned in Answer 5 and 6 are excellent, but I have about a 50/50 success rate with them. I have done over twenty migrations, including NT 4 to NT 4 and the only ones that were seamless were the Windows 2000 based solutions. Proceed with caution.

This discussion is closed to new replies.