9 replies
by poettone
I would do a few things to start over,
1. Format the drive
2. Partition the drive using fdisk, create two partitions , one at 1999mb and the other the remaining free space.
3. Run setup again
4. choose the 1999mb partition as the install partition.
It should be ok
by dmiles
Start over using FDISK /MBR,
Now do a scan of the drive,if you have any errors scan will report and try to fix the bad sectors,when this completes,reboot the computer and do FDISK to Partition and Format the hard drive,hopefully you can proceed if not then you will have to get a new hard drive.Using third party software such as Norton Disk Doctor or Partition Magic may help but is not guarenteed,so try dowloading a copy from the manufacturers site.
by nskharade
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending