Discussion Locked

NTDomain Via ISDN Dial up

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Whats the best way to have a remote Server running in a Domain.

Ie, we have a Lan in London and need to have another small LAN in Scotland. Ideally they will do full file sharing, but min domain authentication and exchange 5.5 transfers.

7 replies

by mjervis

You need to figure out what your bandwidth requirements are going to be. IE: how much data is going to be transferred and how fast it needs to be transferred. That will determine what type of connection you will need whether it be a 64K 128K 1.5m or3m connection.

My suggestion is have a site evaluation done before you spend any money. The money you spend on the evaluation could save you ten fold in the next year.

Also have the eval done by someone other than your ISP who is just going to want to sell you the biggest anyways for thier profits.

by mark_lt

The cost for the distance stops us from using anything other than a 64/128k isdn

thanks for your input

by 4u21der

The first thing you will want to do is determine what level of service of need in your WAN transfers.

I manage a site that has 5 branches and each is connected by a 256k Frame Relay circut. This has been more than sufficent for Domain logins and Exchange X-fers, file sharing, etc.

I would highly reccomned a frame relay solution for numerous reasons. Consult with your local telco to help determine what is available to you and how soon you can aquire the circut.

You may also want to look into settting up VPN sessions between each branch, to further strenghten the security.

Good Cheap VPN Solution: http://www.esoft.com/products/iex2/

Good Luck!

by mark_lt

The cost for the distance stops us from using anything other than a 64/128k isdn

thanks for your input

by 4u21der

The first thing you will want to do is determine what level of service you need in your WAN transfers.

I am not so sure that a PRI ( 128k ) ISDN line is your best option.

I manage a site that has 5 branches and each is connected by a 256k Frame Relay circut. This has been more than sufficent for Domain logins and Exchange X-fers, file sharing, etc.

I would highly reccomned a frame relay solution for numerous reasons ( Speed, reliability, security, etc..)consult with your local telco to help determine what is available to you and how soon you can aquire the circut.

You may also want to look into settting up VPN sessions between each branch, to further strenghten the security.

Good Cheap VPN Solution: http://www.esoft.com/products/iex2/

Good Luck!

by mark_lt

The cost for the distance stops us from using anything other than a 64/128k isdn

thanks for your input

This discussion is closed to new replies.