Discussion Locked

NTLDR is missing

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My Dell 1300 server had NT4 on it. It had two 8gv scsi drives. I formattd both drives and loaded W2k server. At the end of the installation it reboots, goes thru the POST and then replies "NTLDR is missing. Hit Ctl-alt-del to restart." Also tried loading w2k from the 4 setup disks. same problem. some thing i've tries are: loading onto the 2nd hard drive, formating partition as FAT instead of NTFS. occasionally i get: "previous unrecoverable memory error or system error(NMI) occured" - getting nowhere

9 replies

by cavedweller

It sounds like your boot files are beyond the first 1024 cylinders and the BIOS can't get to them. Make a small boot partition and a large data partition

by dmiles

It is a core file which must be in the core directory,this also could mean that other files are missing
1)Boot the system with a NT bootable disk if it is a ntfs partition
2)In the i386 directory of the CD-ROM there is a file NTLDR.__
3)The file is compressed and will need to be expanded
3)Expand.exe d:\i386\ntldr.__c:\ntldr
The other option would to use boot disk and do a repair install

by readie

The boot partition still contains the NT boot reference. Use the dos utility fdisk to remove the "Non-dos" ie:NTFS partition. Once the partition has been removed create a standard dos partition and reboot. Begin installation again.

by jesselou

disable memory shadows and cached items in your bios to resolve your system error nmi. then proceed to answer number 2 to replace your ntldr which may have been modified during your w2kserver installation.

This discussion is closed to new replies.