Discussion Locked
0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have just bought a new high speed laser printer for our NT network which was to replace two slower ones. Unfortunately there seems to be a limit on the number of users who can connect at one time (10). Can anyone confirm this and if it is correct how do I work around it as I need to allow 21 users at a time?
7 replies
by isys
If it's connected to a print server running Windows NT/2000 Workstation, 10 is the max that can connect. You might try IP printing.
by bashful
Thanks for the info. It is an NT workstation that it is connected to so can you help me further and tell me how to set up IP printing?
by take_smile
Following to the massage of isys, see if you have install your printer on the workstation and you shared it then there is only 10 users limit, this is the Max limit to connect to any win NT/2000 workstation. So install the printer on the server give it IP address and share it. There is no number of limit.
Hope this will help you
by bashful
Unfortunately the server is in another room so it has to be connected to a workstation which acts as a print server. Any further help would be helpful.
by isys
Install a TCP/IP port on each workstation. Connect the printer to that port, and have the individual workstations print to that port. Then their print jobs will be sent to that printer.
by bashful
Thanks for the advice. I have resorted to buying a separate print station to solve my problems.
by bashful
This question was closed by the author
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending
1 helpful
15 replies
0 helpful
10 replies
0 helpful
3 replies
0 helpful
2 replies
Question
Is WSL still relevant in 2026?
0 helpful
1 reply