Question Locked

nVidia driver install at DOS

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,
I have Windows Vista RC1. Everything worked fine until I installed an Asrock ALIVENF6G-DVI motherboard. Now, I get an error that says "can't find drive to erase data" at begining of install. I have a Maxtor SATAII hard drive, just one, no RAID. How can I install the nVidia SATA drivers at the F6 in DOS or should I try the RAID drivers with just one drive? Thanks in advance for your help.

2 replies

by hal 9000

You press the [b]F6[/b] during the initial Vista Setup procedure and though this may look like some form of DOS its not in any way related to DOS as you are already using Vista. Granted just the Installer but it's still Vista and has absolutely noting at all to do with DOS in the conventional sense.

What you need to do is copy the Driver for the SATA to the Root of as Floppy as you do not have the ability to search any floppy media for the correct drivers when you are installing Vista so you just copy the drivers for the version of Vista that you are using 32 or 64 Bit directly to the root of the Floppy and when prompted insert the floppy and press enter the necessary drivers will be found and loaded. The current ones reside here

http://tinyurl.com/25xnqx

But for this you may find it worthwhile asking this question at the Vista Owners Group hosted by M$ so that M$ get to know what is happening with their new OS and what improvements they need to make to it to make it usable for the majority of their users. You can find a link to the Vista Users Site here

http://tinyurl.com/yt8adb

It would be a good idea to save all your data before you attempt to do anything as I'm supposing that you'll be looking at an In Place Install but I'm not exactly sure what that will do to your data as Vista is supposed to be more secure and you'll need to take ownership of the files at the very least and if your version of Vista supports M$ Encrypted File System you'll destroy the Encryption Key when you perform the In Place Install so you'll loose all your data.

As you have changed the M'Board a different set of drivers will be required to make this new computer work and you'll need to reactivate the computer again. But the Vista Users Group will be able to answer your questions much better than I can.

Col

This discussion is closed to new replies.