11 replies
The onboard video is disabled in the system's BIOS, right?
The onboard video driver would be part of your board's driver set. I doubt if you can selectively remove parts of that set. You may want to check with the board manufacturer's support site.
by titeo
by jamesrl
Some motherboards have a jumper to disable onboard video. Others do the same thing in the BIOS.
It happenes before the OS loads....
James
What make and model of MoBo is it?
What BIOS version is it using?
Also... Just curious... is this a PCI, AGP or PCI Express card?
And still... just to clarify... the onboard video IS disabled in BIOS, right? or.. is that choice not present in the BIOS?
JamesRL is right (as usual), in that the selection for video is made prior to Windows loading. Essentially, it is a selection made by the board
by titeo
The motherboard is Intel
BIOS version 2.0
Video Card PCI (plain)
I believe that choice not present in the BIOS.
What model of Intel board?
I handy tool I use to get all kinds of system info is Belarc Advisor.
Here's where you can get a free copy:
http://belarc.com/free_download.html .
It will give you the exact BIOS version, board model and tons of other useful stuff.
I've had a lot of experience with Intel boards, so I think we can resolve this one shortly once I have all the info.
I see that you have been having issues with video and your system for quite a while - based on forum threads from last month. Is there anything else I should know about?
by titeo
I download that freeware, installed and ran it.
And here is the report:
OS: WinXP Home Pack 2 (build 2600)
Processor: 2.80GHz Intel Pentium 4
16 KB primary memory cache.
1024 KB sec. mem. cache.
System model: Dell Dimension 3000
Main Circuit Board: Dell 0N6381
Bus clock: 800MHz
BIOS Dell A02 11/08/2004
Memory: 510 MB DIMM
Drives: Main (NTFS on Drive 0) 40.00GB
Sec Drive (FAT32 on Drive 1) 250 GB
Video cards: Onboard: Intel 82865G Graphic Controller; Nvidia GeForce FX5500
Display: 2 monitors Dell 1907FP
Bus Adapter: Intel 82801EB USB
Virus Protection: Avira AntiVir Personal Edition Classic Version 6.38.1.19 Updated.
All required security hotfixes (05/08/2007) Microsoft Security Bulletin Summary have been installed.
Anything else you need to know?
Thanks for your link.
Your system's BIOS should be updated.
Here is the link to the latest BIOS download: http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R115211&SystemID=DIM_CEL_3000&servicetag=&os=WW1&osl=en&deviceid=308&devlib=0&typecnt=0&vercnt=4&catid=-1&impid=-1&formatcnt=1&libid=1&fileid=151932 . You will find instructions on that page as well.
Now on to the video issue....
First let's disable the onboard video in Device Manager.
* Right click the My Computer icon
* Click Properties
* Click the Hardware tab and/or the Device Manager button
* Open the Display Adaptors. You should see the Intel video card
* Double click the listing for Intel whatever
* At the bottom under "Device Usage", click the down arrow and change this to "Do not use this device, disable"
* Click OK- Apply- OK
* Close all boxes when done
* Click Start- Shutdown- Restart- OK or Click Start- Turn Off Computer- Restart
Now let's set the priority in the system's BIOS...
In the BIOS of the Dell Dimension series, There is no option to disable the onboard video, you can only change which video chipset is the primary one.
Here we go:
These steps are for all Dimension 'L Series.' They should be pretty much the same.
* Turn on (or restart) your computer.
* When the blue Dell logo appears, press immediately. Press it every three seconds until the message 'Entering Setup' appears.
If you wait too long and the operating system logo appears, continue to wait until you see the Desktop. Then shut down and try again.
* The next step may be a little different. Either press the key to get to the Advanced screen. Or simply navigate to the Video section.
* Press the key to highlight Video Configuration and then press the key.
* The Video Configuration screen appears.
* The Primary Video Adapter should be highlighted; press the key.
* Press the key highlight PCI and press the key.
* Press the key.
* The Save Configuration Changes screen appears.
* Press the key.
The screen will go black and the system will restart.
Your system will now use the new Nvidia card for video.
BTW... you may want to consider giving your system a performance boost by converting the secondary HD from FAT32 to NTFS and then setting a primary virtual memory swap file on it with a MIN. of 512,000 and a MAX of 2,500,000.
For future reference:
Things always go faster when you supply all the detailed pertinent info and history up front or at least as soon as it is requested.
Please let me know if you have any questions or need further assistance. Also let me know when the issue is resolved.
If you need a copy of the Service Manual for the Dimension, here's a link: http://support.dell.com/support/edocs/systems/dim3000/en/index.htm#printed_documentation
If you are unable to reply to this post due to a 'maximum message level' message, then just reply to your last post in this thread.
Two days ago I received this email:
From: titeo@...
Subject: Thanks
Message:
Thank you for your detailed instruction. It worked. The old video did not come back anymore. I really appreciate it.
I requested that he/she post that here, but evidently, that was too difficult.
Go figure.
by titeo
I found this helpful tips from Bill, "CaptBillyOneEye", so I post his reply to help anyone with the same problem.
Thanks again Billy.
Thanks for posting.
I'm glad I could help.
I apologize for giving up on your closing the thread.
For future reference:
When an issue is resolved, here is what you should do...
1. Respond to the person as a post rather than by email. State that their suggestions resolved the issue.
2. Open their post and click on the button <"Mark "Helpful"> that appears at the bottom of their post.
Thanks from all of us.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending