13 replies
by esemposki
by ntoz
I would check and see if he has any persistant connections using the same drive letter. If for example at one time or another he has mapped a drive using the same drive letter as your application, it might be trying to use credentials from that persistant connection. Right click on My Computer, disconnect network drive. I would also issue a netuse to see if there are drives mapped. Finaly you might check that Microsoft Network under control panel, networking is the primary logon. If he uses theWindows Logon, he might actualy have a different password set to log into Windows or its not being propigated correctly to the Microsoft Networks logon. I would also check the box to logon to the Windows NT domain check box. Hope this helps..
Pete
by esemposki
by ntoz
Another thing you might do is to remove the Microsoft Client and file and print services, close networking which should require a reboot. Then when you are rebooted, reinstall Microsoft Networking's client and file and print sharing. Ive seen cases where they get corrupt and have to be installed again before they work properly. Also make sure all service packs for Windows 95 are reinstalled, often a program that gets installed overwrites a driver thats older then the current SP available and causes issues even after the SP's are originaly installed.
Pete
Pete
by esemposki
by rlevesque
by esemposki
by bohicam1
Have you recently added this user to a group that has "no access" to the database? No access overrides all other permissions given.
Good luck!
Mike
by esemposki
by alajaji
This is not an answer to your question but rather to help narrowing down the problem.
Have the user login from a different machine, better not to be with a win95. If the user is still having a problem, the problem will be with his ID. If the userhas no problem, it will be caused by either the Win95 or the machine itself.
Best of luck
Sulaiman
by esemposki
by esemposki
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending