Discussion Locked

Out of Memory

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

After opening 3 or 4 Windows (applications ), when i try to open Network Neighbourhood, my computer gives "Out of Memory" error. I am using Windows 95 OS as client on Windows NT 4.0 Network. Please respond with an answer.

My PC Configuration isPentiumI with 64MB RAM. Large free disk space and up-to-date Mcafee Antivirus Software Installed.

17 replies

by saihib

You might want to consider putting another 64 megs or RAM into your machine. It's dirt cheap right now. Every application you open is going to suck up resources. Do you really need 4 apps running at the same time? A-V software is a huge resource user and if you're not in a situation where a virus might be a threat, then it is safe to turn it off.

by vramji

I thing, you have loaded TSR programs. Try to remove all your TSR programs (example virus scanners)

by jrincon_v

1- Check your lan card. (if this card is faulth change it)
2- Check the driver for your lan card.
3- Check your tsr?s
4- check the sise for io.sys, msdos.sys, and command.com.
5- check your memory.
6- Check your scrip in the server (if this charga an extence number of option maybe crash down your system)
7- if all of these steps don?t work writeme.

by jrincon_v

1- Check your lan card. (if this card is faulth change it)
2- Check the driver for your lan card.
3- Check your tsr?s
4- check the sise for io.sys, msdos.sys, and command.com.
5- check your memory.
6- Check your scrip in the server (if this charga an extence number of option maybe crash down your system)
7- if all of these steps don?t work writeme.

by jmatt

by nemesis_bob

If you runs scandisk or defrag does the unit give you the same problem.

If so the partition is not set up correctly and you will most likely have to fdisk, format and reload the operating system

by jcjc00

Check your startup file to make sure you do not have any uneeded programs loading when Winows loads. Programs in your startup files should be removed. Doing so will free up your system resources which is probably why you are getting out of memory errors. Adding more memory may not get rid of the error message if your system resouces are low. You can check your resources by right clicking My Computer Icon, select properties and click on the Performance tab. The second line will give you the amount of system resources. Should be 75% or above.

by admin

The cheapest, easiest thing to do is just add more RAM. I would put at least 64mb more in it ASAP if you are going towork in several windows. Sure, you could clean up your TSR programs etc., but memory is REALLY cheap right now.

This discussion is closed to new replies.