Discussion Locked

page cannot be display

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

The problem with my pcis that it cannot display any page.I reinstall internet explorer put the correct proxy settings,and when iam connected to my isp I still get page can't be display.I upgraded the operating system to winME from win98 still the same problem.All the network protocols,services are correctly installed.The problem is not from my ISP.Iam using a HSP56micromodem.
I now deleted TCP/IP-dial up adapter and i could not add it back and as such Ican't even connect to my ISP now.I tried adding it from the network properties but it just did'nt work out.Iam helpless,I need help fast pls.THANKS.

7 replies

by dmiles

With the number of problems,that you have encountered you may be able to use system restore in Win ME,if this does not work then consider reinstalling the operating system.
This will reinstall the network protocols with a fresh start.

by kmerrillt

Not sure who your ISP is but while going through the Internet Explorer setup for connection your best bet is to use AUTOMATIC DISCOVERY and do not set proxy manually. If you could tell us your ISP might be able to give you better info.

by lazyvanbee

1 : You will need to reinstall the TCP/IP adapter. can do this with restore in ME.
2 : Check with your ISP the range of IP's you should be getting when connected, check in -start run- type winipcfg.
This is a problem that happens a lot if the ISP has a problem with there authentication server. Also make sure that in the dun setting you only tick -tcpip-.
hope this puts you on the right path.
luck :)

This discussion is closed to new replies.