Discussion Locked

Page File Authority

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Anyone care to give the ultimate guide to page file setup.

I have read 4 manuals on Win 2000 Server and Win 2000 Pro but all give RAM+64 as the recommended value.

Using this value in Win 2000 Pro using 196Mb RAM would give a recommended minimum of 256Mb, if we use the formula.

Windows puts 768 as the default upper limit. However, "page file is too small" is displayed in this configuration.

What is going wrong?

9 replies

by awdfg

Well anything between 1.5 to 2.5 times the RAM is a optimum setting.The upper limit shown by windows is the free space on your
drive.

by jwilczyn

Recommended min paging file size is 1.5 times the amount of RAM installed, max 2.5 times the amount of RAM installed.To optimize perfomance of the paging file, move the paging file from the boot partition to a different phisical disk. Set min size of the paging file eg. 192MB same as max size to 192MB. Why? The paging file starts at a certain size and is configured to expand as memory needs increase. Evry time the paging file expands, it takes system resources to resize the file.

by umbral-echo

For the best page file performance you want to prevent it from growing by setting the maximum and minimum page file size to the "Recommended" value displayed on the dialog box where you change the size. When it grows it fragments causing performanceto degrade. Most of the books say 1.5 times the amount of RAM but the best value is calculated by the operating system. All the page files you set should equal this value.

If you are concerned about the space this takes up set the minimum to 1.5 times the amount of RAM and the maximum to the "Recommended" size.

This discussion is closed to new replies.