11 replies
by gary56789
Will it boot up into safe mode? If so, click start--run--type in "msconfig" (not the quote marks) and press Enter--click on the Startup tab in the System Configuration Utility window which comes up--click Disable All--click OK--restart computer.
If this doesn't help, try to do a Repair from the installation CD. This may be the quickest solution, as there are lots of things which can go wrong with an install which can cause this.
by mtorres7
Poster rated this answer.
by rudhud
by mtorres7
Poster rated this answer.
by parthiv_13
Hey there,
Check your RAM module by replacing new one for trial purpose. Defected RAM modules can do this problem. It makes PC restarts after each fix time period or memory stake flows. Try to replace the RAM module to check it out.
Good Luck and don't forget to post the correct solution for your problem.
by mtorres7
Poster rated this answer.
by sgt_shultz
you are getting a blue screen error but windows is set to automatically restart on error so you get the reboots. you need the blue screen error. it is probably a driver.
you could try last known good config
if you installed say, a printer driver just before this happened.
you should have a Startup menu choice to Halt system on error, To start in Safe Mode, to go to Last Known config. try those, repost if no joy.
Before i put xp sp2 on a dell or any other pc i visit mfg website, download and burn and install (in your case you only probably could have upgraded the bios) latest bios and drivers.
you can fix the errant driver with Recovery Console once you find which one on blue screen
by mtorres7
Poster rated this answer.
by mj_consult
by mtorres7
Poster rated this answer.
by mtorres7
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending