First of all thanks for the reply,
Ive just measured the two most common voltages of my psu with a voltmeter and is as follows:
12v reads 12.20v
5v reads 05.15v
i will test the 3v line later...
but ive noticed something really strange on the green power LED on the motherboard (not case power LED)
when i power up the psu the mainboard LED is dim for about 20 seconds then suddenly it goes to its proper brightness, only then will the pc power up properly, even if i press the case power button it stalls untill the LED is brighter, so im not sure it could go either way here, could be the psu, or a capacitance problem of the motherboard, as ive tried every other possibility like removing ram, memory, soundcard etc.
As you said above it should not take any where near 20 seconds to charge the capacitors enough to boot the pc, and this strange problem has only just started happening about a week or so ago, until this its been really rock solid stability all round, but i have had 2 random reboots also one 5 days ago and one tonight, i put it down to windows (the reboots) until i spotted the motherboards LED activity when i plugged the pc in at the mains. When its running its all ok, but cant help wondering if it will get worse due to this.
I was wondering if you knew of which voltage of the psu i could test (if there is one) that powers the mainboard (without the system powered up) what i mean by this is if you knew what voltage of the psu was causing the power LED of the mainboard to glow dim then bright before it works.
any help whatsoever here would be very helpful, and once again thank you. Paul.