Discussion Locked

PC TO TECHNICIAN RATIO

0 helpful
16 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I work in a 500 workstations Netware supported Law School. I would like to know what the standard technician to pc ratio in this kind of environment. I am trying to establish some response time figures to assist managment.

16 replies

by gijoe

It depends on a number of factors: How old are the computers? What is the quantity of problems? Is there expansion of either computer qty or hardware problems? Does your current support staff able to handle the load or not?

Generally, 1 tech per 100 - 150 computers is about a norm. If there are a lot of maintenance/user issues or a lot of perpiherals that require maintenance as well, then the number should be higher.

by gijoe

There is no published standard. Everything is contigent on each individual organization and what that organization can (1) afford, (2) reasonably hope for as an acceptable downtime for one or more employees because their computer is not working, and (3) how critical computer applications and tasks are to the business as a whole.

How many businesses use technology 100% of the time and absolutely cannot use another computer in the meantime?

by maxwell edison

Greetings,

50 PCs to 1 technician is a ratio that could easilly be handled in most environments. Even a 100-1 is workable, depending on the use of the PCs and the experience of the users.

Maxwell

by ð

i've been jumping around from big cooperation to start ups and the usual Tech to PC for level 2 support is 100-130 per tech.

by ann777

In this corp environment we have 6 staff of 2nd level support (in house technical support and phone help desk functionality) for 1000 in house users.... and thousands of external laptop field users.

So we're talking 1 tech per 170 computers in house alone.

----

I've been in sys admin positions where I was handling everything as both tech and systems for public libraries... and we're talking between 100-150 computers total. Therefore, I tend to agree with the first poser.

But it does depend on the sophistication of the network and the abilities of the users as well. And sometimes, it depends on the patience and understanding of users when the network goes down, or is being upgraded or whatever.

by fekade

Thanks for all the answers submitted. However, I would like to know if there is a standard pc to technician ratio accepted across the board in this industry. I agree with some of you when you mention age of computers etc. however, a technician withthe proper tool and certification should have a given number of machines to handle.

by timthetoolman

Hi,

Yep, I've worked in an environment where we had 12 or so support staff looking after 1800 PCs. Which gives a ratio of 150 PCs per tech.

In that environment there were other IT staff around who could pitch in, in times of crisis, though.Cheers,
Tim.

by timthetoolman

Oh ,and looking at your extra comment at the end of the posting. I've never seen a "standard" for techs per PC. There are just too many variables.

For instance there will be more techs per PC if they're considered business critical and less if they're not.. And everything in between...

by csmith

The worst ratio I have ever seen is about 300 to one.
This produces a technician turnover rate of about 400% per year in that organization.
The management is concerned, but they are short on funds.
As stated, there is no standard, but I think this facet of the question also needed to be expressed.
Regards, Chris

This discussion is closed to new replies.