Discussion Locked

pc wants an ac to cool itself

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

the problem with my pc is that ,after running for about 3-4 hours when it is switched off .
and if again started power doesnot comes to the cpu ie, the machine refuses to boot . it boots only after 18-20 hours . i have only one fan and thought fan might have burned but that is not the case ,fan is ok
i cannot make for this behaviour of my pc
please help
thanks
amartya,INDIA

4 replies

by bfilmfan

Check the BIOS setting for the thermal shut off for the CPU.
You should be able to either vary or turn it off.

Did you mean to say you only had one fan on the CPU or only one fan in the PC?

by amartya07

i mean to say my cpu has one fan only & no one pampered my bios settings
anyways thanks for your suggestion looking for extra help

by g.brown

The next time it does not power on, turn the machine off at the mains and hold the power switch down for a few seconds. Plug back into the mains and then see if it powers on OK.

If you are quite sure that it is not a hibernation/standy problem and believe it is a hardware fault.

The most common is the Power Supply ... if that previous trick worked then this is the most likely.

The motherboard ... not as likely as the PSU .. but the only way to really test is to use a different PSU ... if that does not fix it then it could be the MB.

by www.sanoor.com

HI

Well there could be two options to test
As the first answer Probably true or the second one is.

First one is not clearly stated.
In BIOS settings there is CPU temperature settings which may have set to 45 or 60 Degree where in you can disable it or increase this temperature settings to 70 degree which is max.

Second one is
Probably there is a SMPS Fan which may not be working some times due to high temperature CPU will shut itself. and it may refuse to start immediatly so.

More over we had the same problem in our office computer where by computer used shut itself and when ever we try to restart it should never start,

thanks

This discussion is closed to new replies.