Discussion Locked

PC wont switch the monitor on

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
The screen says, that the monitor is not available, or there is no power, but is connected

2 replies

by jschein

Is this a video card in a slot (PCI or AGP) and your system has a built in video card on the motherboard as well?

If it is, put it in the other video port and go into the system bios and disable the onboard video so it goes to your newer video card.

If not, unplug your video cable and look at the pins. Ensure all of the pins are straight and noth bent or touching other pins.

by skidoggeruk

Could be your resolution is set to high for your monitor. try booting into VGA mode, by pressing F8 when the words "Starting Windows" appears, and select "Safe Mode VGA". Once there go into Display settings through Control Panel and re-set to a lower res. IE 800 x 600

Sometimes this happens with refresh rates as well, depends how good your monitor is. Check those if you think the resolution is ok.

Good Luck

This discussion is closed to new replies.