10 replies
When reinstalling the driver - instead of using "Search for a driver for my device", use the "Display a list of known drivers..." and then select "Have disk" browse to your driver disk files and select "Show all hardware" instead of "Show CompatibleHardware".
This will enable you to override Windows and spell out the correct driver to use, from the correct location.
Naturally this process will work better if you get drivers from Linksys and use them instead of the Win2000 built in, but the basic process should work even if Linksys has not released drivers for Win2000 on their website
by easttdav
Agree with northernpenguin. In addition to that : Remove ALL TRACES of pcmcia nic drivers, and all configuration in your Network places. Remove any presence of any device from the System Other Devices. Remember ALL ! Then proceed as suggeted by
NorthenPenguin
by easttdav
by easttdav
by dbunda
by easttdav
by lanwanman352
Agreed! Its got to be incompatible drivers (always is with Uncle Bill).
First, I wouldn't trust an evaluation copy of Windows 2000. I have never believed that these eval's include all of the latest drivers avialable in software released by Microsoft for production and sale.
Because this was an upgrade from Windows ME to dual boot with Windows ME and Windows 2000, we must consider that in Windows 2000 the PC Card and the PC Card socket driver must both be Plug and Play (PnP) compliant; and both have to be Windows 2000 compliant.
If both items are Windows 2000 compliant, the PC Card is PnP compliant, and the PC Card socket driver is NOT PnP compliant, the PC Card would normally not even appear in the Device Manager list.
After verifing that the PC Card and the PC Card socket driver are both Windows 2000 compliant, we can suspect that there is a conflicting resource since we can see the PC Card on the Device Manager list along with the yellow exclamation point,
At this point consider that the default configuration on Compaq Presario 1200-Series Laptops have been known to cause a hardware conflict (see Microsoft's Knowledge Base article Q274509 PC Cards Are Not Recognized in Windows 2000 on Compaq Presario 1200-Series Laptop Computers; and Q281505 PC Card Device May Not Work in Windows 2000).
Try another PCMCIA NIC that is known to have worked with Windows 2000 in the Compaq Presario 1200-Series Laptops.
Use the Add/Remove Hardware Wizard in Control Panel to add a new device drivers that may not be PnP compliant.
(end)
by easttdav
by easttdav
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending