Discussion Locked

PDC shows as workstation in Server Mgr.

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We are having authentication problems with Win95 stations that are trying to authenticate to our NT 4 SP6a domain. Users were recieving the message "No Domain Controller available to authenticate your request". We are running a PDC/BDC domain, andare running a WINS server on our BDC. We do not believe it is a sp6a issue, as authentication was working fine for at least a month after our installation of the service pack. We have also uninstalled, and reinstalled our WINS server to verify thatno errant WINS entries were causing the problem. No other installations or changes to the servers have occured since. While reviewing the settings on the PDC, we noticed that Server Manager shows our PDC as a NT Workstation. When trying to do a status on the PDC, we get the message "No PDC found". We checked registry settings, as well as using command line net commands, and they both correctly show the server as the PDC. The BDC identifies itself correctly under all circumstances. We are looking at promoting the BDC, which should demote the current PDC, and then reversing the process to see if that resolves our problems, but thought I would see if anyone else has a less drastic suggestion that may cure our ills.

7 replies

by dc1

I would have suggested promoting he BDC to the PDC. Another thing to try is in Server Manager select the PDC and choose to Synchronize the domain.

by bill cassada

You could try promoting the BDC to PDC and taking the current PDC offline. If it works there is a confirmed prob with the PDC. I don't recall any KB issues relating to this but as we all know the KB is too large to remember every article. At any rate the BDC is, by design, there for times like this...don't forget to backup all critical data...blah blah blah. I would be interested in learning the cause if you should isolate it. Good Luck!

by curlergirl

Check your WINS database - do you see a listing for your domain name with a [1Bh] after it? If not, then your PDC is not correctly registering with WINS, and this could be the cause of your problem. Check the TCP/IP properties of your PDC and be sure you have the IP address of your BDC/WINS server in both the primary and secondary WINS server addresses. The only TechNet article I could find that directly relates to your question has to do with having a Samba Linux server. If you do, look at TechNet article Q250263. Hope this helps!

by moonj1

Sorry, all entries in the WINS database are correct for the domain. Also, both the PDC and BDC are pointing correctly to the WINS server.

This discussion is closed to new replies.