Discussion Locked

Peer to peer network Windows xp and 98se

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a client with a peer to peer network Windows XP is the internet gateway with an internal ADSL modem and the two 98se computers share this internet connection. There is a Deskjet 640c printer shared by these computers. After virus problems the two 98se machines were reloaded but I could not get the the 98 machines to print off the printer if it was connected to the xp machine they would just print rubbish. So I connected the printer to one of the 98 machines but the xp machine is now slow in printing. Also the 98 machines partialy drop off the network at times. To network the computers I ran the network wizard on the xp machine and then used the file made by xp to get the 98 machines on the network.

I was just wondering if some one had an idea why the printer won't print off the 98 machines if it is connected to the xp machine. Also would an ADSL router make for a more stable network?

Thanks Peter

8 replies

by bfilmfan

It would certainly reduce the workload on the Windows XP box which is acting like a router.

Sounds as if the printer driver was not connected correctly to the share on the Windows XP box. In a shared resource environment, the print spoolers on both systems are going to heavily utilize the processors and network cards. Did you download the latest one available from the manufacturer?

How much memory does the system attached to the printer have? This could have a large effect on the time it takes to print a page.

by ryder007

When you activated sharing on the printer did you click the additional drivers tab? You can specify there that you need drivers for win98 and xp will provide when you try to print.

This discussion is closed to new replies.