Discussion Locked

Peer to Peer /win2k to WinME

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

OK I have barely looked at Win2K. Didnt think there would be much curve.

Any way heres the prob:
New IBM with win2k installed and one Compaq laptop with Win ME. Each have good NICs into a Netgear hub. Both have names and a workgrp name. only 1 passwrd was set. When I couldnt get the Compaq access to the IBM I got rid of NETBEUI and used only TCP so I could trbleshoot. Connection good and live. Both see each other.

But Compaq cannot access the IBM, IBM CAN access the Compaq. Yes both areusing FAT32.

Try as I might, I sadly admit I dont understand why I cant get the Compaq access to the IBM. It keeps asking for a password, which was not set by me.

I have 2 days before I lose this job, HLP FAST!

TIA

8 replies

by the scruffy1

i know it might sound stupid but have both had the drives shared and a password put in there,are they read only,full access.or try in the control panel users and passwords.

by dle

Just make sure that you are logging on to the Win ME station with the same username and password of one of the local accounts created under Win2K.

Right-click on the Win2K's My Computer and select Manage. Drill down to the Local Users and Groups to add new accounts or to change the passwords.

by el-gman

Both drives are shared, full access, no passwrd given. When Compaq (winme) tries to access IBM (w2k) it asks for a passwrd, when I set none. The C$ share was deleted. And new one in place.

by dle

Are you getting an IPC$ password prompt? If you are, Win2K is telling you that it does not know who you are. Try logging on with the administrator account on the ME machine.

You can't get rid of the C$ share. It will come back. It's built-in Win2K administrative share. If you want to share the entire C drive, click on New Share button and give it a new name. Again, you will need to logon with a valid username and password on the ME station that matches an account already defined in Win2K. If you are connecting to this Win2K machine from another Win2K client, you will have the option of "Connecting As..."

This discussion is closed to new replies.