Discussion Locked

Pentium 4 and Intel 850 Motherboard...

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Our in house Ad rep creates ads for various newspapers, etc. To do this the company purchased a new computer and some really nice software packages for her.

System:
Pentium 4 1.7 GHz, 512 MB of RAMBUS RAM, 2x40GB UDMA 100 drives, Intel 850GB/850GBAL Motherboard (has on board ethernet card...was brand spanking new when purchased) ATI RADEON All-In-Wonder (64 MB RAM and all of the bells and whistles), 3COM 5977 OEM modem.

Software:
Office XP PRO (OEM Edition), Adobe Illustrator, AdobeAcrobat, Corel Draw 10, Windows 98 SE, Internet Neighborhood(FTP client...easier for her to use), all patches and updates applied with the exception, to this point, of updated video drivers. She is also running NAV 2001 w/ Auto-protect turned on.
Problem:
She can be running ONLY Adobe Illustrator, all sys_tray items turned off, no other programs visibly running in the background, other than essential Windows functions, and the rescources will be at 50% or less resulting in an out-of-memory message and forcing a reboot. This is intermittent, in that it does not happen everyday, but often enough that she has to come to my office and ask what to do. So far, I have not been effective in killing the problem, nor have I seen or found any information specifically related to this or similar issues.

My question:
Has anyone run across anything like this and fixed it or found any information on fixing it..permanently?

Any feedback would be appreciated.

Thanks,
Robert Clark
MCSE,MCP+I, A+
MIS - Texas Cellular

11 replies

by saihib

Check the properties of the win386.swp file and make sure it is not set to read only. If it is read only Windows won't be able to change the size of the swap file and it can cause the error messages you describe.

by robert

The swapfile was not set to read-only...but I did reset it do be dynamically managed by Windows...wonder if that will work...:-|

by jesselou

first check the bios settings most particularly the agp and pci shared memory if they are set correctly as well as the shadowing.then restart computer check the ms config and uncheck those programs that aqre not necessary. restart, then go to systemin contro panel, in the performance tab select file system and network server, in virtual memory check let me specify my virtual memory then input 1.5 plus in your physical memory then restart.

by robert

I've already set BIOS settings, done all of the tweaks to 98 that I can do, I even went back and reset the Swapfile to be dynamically managed by Windows. (By the way, you should set the VM at 2 to 2.5 times the RAM).
I have also disabled all Startup items that are not absolutely necessary. I am wondering if there is an issue with the P4 motherboards and the RAMBUS busline properly utilizing resources?

by csmith

Good Question.
When the PC has over 512 MB RAM, this is usually a Windows memory management problem.
You are right at the limit, so I would start by disabling NAV, to see if the bug in it, is the problem.
To test for the memory management problem, we usually turn off virtual memory, and run only the main application (Adobe). If it runs OK, then we start applications until the problem occurs.
(You obviously have to have a memory reporting tool running during this type of troubleshooting.)
Good Luck.
Regards, Chris

by robert

It's unfortunate, but it does not seem that memory is the problem. I do appreciate this suggestion, since I hadn't thought of it.

by expertpc

We had similiar problems (different hardware) with Adobe products. We found that Illustrator does not always like to release the memory it is using. Once the program was shutdown all was fine. Open it back up and gobble-gobble. This happened on NT-98-2000 machines. The only similarity was dual processor (except 98) and Adobe products. Adobe never responded to our calls and emails with any real help.

We ended doing complete wipe and reloads and the problems went away. It was very ah. INTERESTING!

Good Hunting

by csmith

I like the answer of Pat Burke (pcexpert@home.com)
I never thought about the fact that, we also (sometimes) change the load order, after we have disabled the start of all programs in startup, when we look for this problem.
Talk about forgetful! The load order of the TSRs in DOS was important, in many cases.
This may be a 32 Bit version of this same problem.

I forgot to mention the other reason we turn off virtual memory when troubleshooting this problem. It makes the PC crash faster, thussaving time.

Again. This does look like an OS memory management problem.

Regards, Chris

This discussion is closed to new replies.