Hi All,
As always, any help will be gratefully received:
Pix535 hasn’t work properly since replaces Pix525 with same configuration.
? Enviroment:
Pix535 is at the same place with Pix525.
? IOS Version:
○ PIX525 — PIX Version 6.1(2)
○ Pix535 — PIX Version 6.3(4)
? Status:
○ After replace, the inside and outside interface can be successfully “ping” from inside LAN
○ Outside IP Address like 4.3.2.1 can’t “ping”.
“static (inside,outside1) 4.3.2.1 10.2.2.2 netmask 255.255.255.255 0 0
conduit permit tcp host 4.3.2.1 eq www any”
Seems has no effect.
1.Can I replace pix525 with pix535 this way, using almost the same configuration?
2.If u know something about upgrade 525 to 535, please let me know, any documents, articles.
3. Is there anything support can be found in www.cisco.com about upgrade pix525 to pix535?
Thank u for your attention!
Gratefull