Discussion Locked

Port addressing in Win 2K

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am running a NAT on Windows 2K Adv Server.
My question is:
How on earth do I forward a range of ports rather than one at a time??
The NAT in Win 2K only allows one input at a time rather than a range.
I need to forward 1000 ports.
There has got to be an easier way!!!
Any help would be greatly appreciated!

Orlando

2 replies

by lordinfidel

Just a quick question...

Why do you want to forward 1000 ports for NAT.

A rule of thumb to follow with NAT (and firewalls in general). Do only what you need to for your clients to connect.

Unless there is some compelling reason to map every port out there, Basically defeating the purpose of NAT, just do the basics.

Keep it simple; web, ssl, maybe some streaming media (554, 7007, tcp/udp 1755)

Anything else, drop unless it is explicitly needed. Then you do not have to map every service out there right off the bat. If you find that you need something opened, do it at that time.

Don't forget to document all of your work as you go along. I recommend creating a spreadsheet and document each port you opened, mapped to, dateand why.

Good luck

by resq935

Actually, "1000 ports" was a typo!!!
I need to forward 100 ports.
What is the easiest way to forward them, other than one at a time?
How do I forward a range of ports?
Can I configure Visual Basic to do so? How?
I don't wright in VB.

Thanks,
Orlando

This discussion is closed to new replies.