Hardware

Ask something
Discussion Locked

Print Server Password

0 helpful
3 replies

by philippians

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have installed a print server (CNET CNP430 B) with HP DesignJet 500 in our network. The IP address I configure it manually. When configuring a workstation to be link with the print server it asked me for the password. I can not remember the password I used. I have removed & reinstall the program but still it is looking for the password.

Can anybody there help me with this problem? Thank you very much

3 replies

by pctech

Hi,
I went to the CNET website and could not find a manual for this model.
You can look to see if there is a reset switch on the print server. This will usually be a small hole that will be marked " reset ". Should your print server have this reset, simply use a straightened paperclip, or something similar, and press the reset switch for several seconds. This will reset the print server back to factory default, including the admin password.

I hope this helps you.

by philippians

Poster rated this answer.
Thank you for your effort but there is no reset switch with this print server. After posting this last night, I went to the CNET website and I found an over-riding password "PSPASS" With this I have opened the control panel of the print server. Again thank you very much for your effort. God bless

This discussion is closed to new replies.