Discussion Locked

Printer not sharing

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I tried sharing a printer on a 98 machine...but the sharing tab is missing when you right click on the printer name. I need help!

9 replies

by rickh9

Make sur that "File and Printer Sharing" is installed under Control Panel - Network and click on the box toward the bottom of the page.

by mikelane0

Not all printers are network compatible. Check your printer manual to ensure that your printer is networkable before you go any farther.

by roland63

Try this; Right-click on Network Neighborhood icon. Select Properties. On the Config tab, click on the "File and Print Sharing" button. Check IN "I want to be able to allow others to print to my printer(s)" click on OK button then OK again.

Nowtry selecting the sharing option from the printer name like you did before..

by klgreen15

Make sure you can share files. Click the file and print sharing button in network properties from click in the control panel on network or ight-clicking on the networ neighborhood icon and selecting properties. Go into Printers and right click the printer you want to share. Clic sharing and then select shared. The bottom will then be able to be edited. Click add new printer in the printers folder in start-setting-printers. Click network printer. Click next. Make sure the ms-dos based program isselected to no. Click browse and find the the name of the computer it is attached to. Click the plus. Slect the name of the printer. If at anytime you are prompted to restart your computer then do it. Click next. Restart both computers or however many you installed the printer to and it should work. If it doesn't check the wiring.

This discussion is closed to new replies.