Discussion Locked

printer problem

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My printer doesn't on my PC I reisntall the diver change the bios setting few time I try with win98 and win2000 when I click the page test a diagnosetic test start and keep running whit a scrible line and Model name, number, date, and status who say OK.The icon is in printer folder but dont work I done internal test on the printer who work OK. I
connect to my laptop and printer work OK. It use to work fine before, how can fix this problem? Thank you.

1 reply

by purple713

I need more info. What type of printer is it? In the BIOS you should be using either Bi-directional or ECP. Check inside the PC to make sure that there is not a loose cable on the motherboard. If the printer port is mounted to the mother board, there could be a failure in the port. Best way to test this is to get another printer port and test it out. (Looks lik a Expansion card). If that works then there is a problem with that port. Make sure that the port is also reading from LPT1.

Hope this helps.

This discussion is closed to new replies.