Discussion Locked

Printer Problem NT4.0 and HP DeskJet

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
On a NT 4.0 workstation with a HP deskJet local printer (serial connection), while logged in as "Administrator" I can print to the local printer. While logged in as a normal user, when I try to print the local printer, the print job goes to the spool, then gets deleted. While logged in as a normal user and I try to print to a network printer, there are no problems If I give the normal user administrative privilages there is no change. The application prints to the spooler, then it is deleted by something.

7 replies

by rawright

Check the responses to your question in the NT forum! I think one or the other of us has got it right... Good Luck!

by pbahm

I had this very problem with an HP deskjet950c connected to LPT1. I reinstalled the printer from the cd five times. I finally referred to the next tier support. When he arrived the next day, everything worked ok with no action taken on his part.The only difference, was the user (with admin priviledge) logged out and did a restart for the next day. Before I insisted on 2nd tier onsite support, the remote desktop group recommended that I install the printer as the user instead of as administrator. I was/am reluctant to do that. I may have to add another user account to this machine and that user would not have access to the same printer. CAME CLEAR BY MAGIC?

by paul d. masley

Deskjet printers are a strange group to deal with, expecially on a network, with a local setup. I have always used one thought. Regardless of what is installed, follow the written procedure, stop, reboot. This way the settings are made in the registry. Usually folllowing this procedure stops a lot of problems.

This discussion is closed to new replies.