Discussion Locked

Printer problems

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a printer that is causing headaches. The printer is a HP Laseerjet 2100. It is installed to a client machine with windows 95. The printer is being shared in the network. The problem is that it does not print 3 times out of five a job is sent to the spooler.
I tried reinstalling the printer, disconnecting and reconnecting the share, deleting and recreating the port, inspected the configuration for any conflict and still, we have to press the reset button in order to print a job that has been spooled already.
Sometimes, I am getting a message saying that it is out of paper when I just refilled the tray.
I have tried all the tricks in the book and follow the troubleshooting process. I only have to change the cable and test the printer for defects.
Any suggestions?

13 replies

by magetower

Make sure you are using the correct type of cable for the printer. Most printers nowdays require a bi-directionl cable to be able to relay status back to the servicing system.

by shmaltz

try using the HP Laser Jet (its called "HP Laser Jet") driver that comes with win9x instead of the driver that HP gives you on the CD.

by jpt

You may actually have something wrong with the printer. You may need to have someone look at the sensor on the printer that pretains to the paper feed. I know that we have had that problem in the past with other printers. The printer cable shouldbe a IEEE type cable. This is what we are using for the same printer without any problems. One other thing (I know I don't have to mention this), make sure the computer is on all the time.

Good Luck

by frank.vrba

Check your version of 95. Is it B? The newer the better. Win95 isn't known for it's server functions (which is what you're doing). If you have a server on the network, consider moving the printer to connect to it or getting a print server and run all your printing through the server to the print server. A server does a good job of keeping print jobs ordered.

I presume you're using this for more then one computer on the network. Are the jobs piling up? If it stops printing and you restart the machine, can the jobs print then? If so, I would check the resources too. Right click My Computer>Performance tab. If the percentage is low, (below 50% or so)try stopping some of the running programs before startup. You should be able to start around 90% or so when you turn on the computer.

If you need help with that, let me know.

by old and tired..

This might sound redundant...but have you confirmed that your users do not shut down the file being printed BEFORE all the data has been sent? Most users expect to hit print, and then not look at the bottom of their monitor screen to confirm that the printer icon has closed, to indicate that the print job has been successfully downloaded to the printer server

by jwilczyn

You can try to change the driver for this printer (PCL5e, 6 and PostScript). The PostScript driver may fix this problem. Next check/change the default size of paper - A4-size in Australia and Europe, letter-size in America. Very often a document is created in the letter-size (wrong settings in MS-Word or Regional settings) and sent to a printer with A4 paper size only ?what gives a massage ?out of paper?. Then you need to press ?continue? or ?go? on the printer.

This discussion is closed to new replies.