Discussion Locked

PROBLEM WITH ABIT SILURO T400 VID CARD

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
FIRST OFF I HAVE THE ABIT KT177 MOBO WITH 1.4 AMD PROCESSOR AND I'M RUNNING WIN98. AFTER LOADING UP DRIVERS FOR MY VIDEO CARD. THE MACHINE WOULD BOOT TO THE WIN98 BOOT SCREEN THEN THE COLORS WOULD GO PASTEL-LIKE THEN HANG. THERE IS NO NETWORK CARD JUST A SBLIVE 5.1 XGAMER. IS IT POSSIBLE TO HAVE BOTH MY OLD VOODOO 2 AND MY GEFORCE2 LOADED AT THE SAME TIME? I HEARD THAT THERE IS AN ISSUE WITH MY BOARD AND THE CARD (ITS VERY POWER HUNGRY BUT HEY...I'M RUNNING 2-512 STICKS OF PC133 RAM. ANY SUGGESTIONS?

3 replies

by oldchewie

The 1st thing to try is to see if you can boot Safe Mode. If you can, I would say it's a driver issue. Put the old card in and get updated drivers for whatever you can and try again.

Good Luck!

by jerry_l

Thanks but I already know its a driver issue. I've flashed the bios and have formatted the hard drive. I've had every other card placed in the board and it all works but as soon as I shut down the computer to replace it with this Abit T400 as soon as the computers turns on it would either lock up on the Windows98 boot screen or the video would be completely lost. I appreciate your input. I really like Abit boards except their video card!!!!!

This discussion is closed to new replies.