Question Locked

problems with windows XP installation in hp compaq nc6400 laptop

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hi,

i m facing a problem with windows XP installation in hp compaq nc6400 laptop.

Whenever i try to install windows xp it shows the following message--

"Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3. "

Plz someone help me on this matter.

NB. i have not found any option at my laptop's BIOS to change the SATA mode from RAID to IDE

7 replies

by oh smeg

To install XP you need to push the [b]F6 Key[/b] at the first blue screen and install the SATA Drivers from the Root of a Floppy.

Failing that you could make your own Slipstreamed Install CD by following the directions here and adding the SATA Driver not SP2

http://tinyurl.com/326fg3

Col

by hlakam

Under Device Configuration in BIOS, disable the SATA Mode, and reboot after making sure the CD-ROM option is your first boot choice.

That should do it.

by sunikj

F10 bios system configuration device configuration disable sata native mode

This discussion is closed to new replies.