Discussion Locked

proxy email over a BNC network

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to avoid using a hub for a small peer-to-peer network with 4 PCs running Win98SE using BNC coax cable. One computer has a second network card that is now connected to a cable modem.

Using the IP for the NON-cable modem network card #1 as a proxy, I am able to access the Internet on all four computers using IE 5.5.

On the primary machine I am able to access email with both Outlook and AOL using TCP/IP as the connection.

I can even access web-based mail (AOL-netmail and Hotmail.com) from the satellite computers once I am on the internet. (Each of the machines still has a modem and is capable of dial-up email connections.) But I CANNOT get email to run with TCP/IP from the satellite computers through the primary computer to the internet, nor can I get Outlook to work except through the dial-up modem.

My understanding is that I need to "define the ports" that the email is going through on the cable proxy computer for send/receive email. I do NOT want to switch to ethernet and get a hub. Surely if I am able to get internet access through the primary network card as a proxy, I should be able to configure the satellite computers to send and receive email.

Any suggestions?

5 replies

by grantcom

I just setup an identical configuration for a client using Win98 ICS and had no problems. What are you using for the proxy? I assume you have the DNS configuration correct if they can browse the internet..i.e. host=computer name and DNS server is the static IP of the non-cable modem NIC...should work. You are probably correct in re: ports but all I can tell you is mine are set to 25 for outgoing and 110 for incoming (default for outlook). Do you have a firewall that may be blocking you?

by james_randy

If you are still tackling this problem, perhaps you should consider calling your local super-hero.

This discussion is closed to new replies.