Discussion Locked

Proxy Server to connect to domain?

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am trying to join a private segment of addresses to our public segment of our network using Proxy Server 2.0. I can use the IP services provided by Proxy with no problem, and according to what I've read in TechNet and elsewhere, if you open ports 135-139 you should be able to receive domain information via NetBIOS and RPC. Is this possible and how can this be accomplished. I really need to be able to access our DC & other servers from computers that are behind the proxy. Thanks!

7 replies

by huvason

If you are going to open up those ports, why use the proxy at all? Those ports are a definite no-no to leave open. If a hacker scans your network and sees those ports open, he's sure to stop and see what else he can do. For instance, unless you edit the registry under NT, a hacker can make an anonymous connection to any NT server if those ports are open. Then if he's lucky and you leave a passwor dblank or something, look out.

If you want to use proxy and still want acees like you say, investigate setting a VPN. You can even use Microsoft VPN, as long as you are using MS clients as well. That way you are not leaving your network open to an easy hack.

good luck...

by maronism

The point is not to act as a firewall in this case, it's to add a private segment to a public network, without having to modify the subnet mask in order to do so. Proxy will provide that with the exception of giving access to NT resources such as authentication, file sharing, printing, etc.

by knudson

I think the other person had the basics nailed. If I understand what you are trying to do is use NT as a router, not really a recommended thing. But if you must, yank proxy and enable IP Forwarding. Further info can be found on MS lookup RRAS yes 2Rs.
DO NOT DO THIS IF EITHER SIDE HAS DIRECT CONNECTIONS TO THE INTERNET.

by knudson

I think the other person had the basics nailed. If I understand what you are trying to do is use NT as a router, not really a recommended thing. But if you must, yank proxy and enable IP Forwarding. Further info can be found on MS lookup RRAS yes 2Rs.
DO NOT DO THIS IF EITHER SIDE HAS DIRECT CONNECTIONS TO THE INTERNET.

This discussion is closed to new replies.