3 replies
by lo
Hi - No specifics on your solution. Some time back I did a base CD Player using VB (v3 or os as I rememober). That wasn't too dificult but the MIDI control had all of the required functions, I only needed to activate /call/set property. From that, and to do in QBASIC, you have a bit of a task as you will likely have to deal with all of the low level procesing and error handeling. You may be able to copy the dmaplay.bas and modify as sub probram to perform the functions from your QBASIC (or create a file of commands and feed it to dmaplay.bas). May be some license issues for dmaplay.bas.
Might contact SoundBlaster and ask them if you can obtain a copy of the Technical Reference programming manual for their card(s). That should giveyou specifics about how to deal with the card (they may not give you this (propritarty) and likely will charge (a fair amount) if they will provide a copy.
You may have to do some assembler functions or subroutines to get reasonable performance or to deal with some issues that are a bit beyond QBASIC abilities in an efficient manner.
This discussion is closed to new replies.
Trending Web Development posts
Sort by Trending