Question Locked

Raid 1, Boot not recognized by W2K3 while installing...

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Trying to revive old ML350 G3 with smart array 5300. Configured SCSI 0 and SCSI 1 mirrored with Compaq ACU.
During installation of W2K3, windows recognized array, partitioned, format and copied sys softwares.
The problem comes next also during installation. When the system reboot, I get error message; no boot drive.
What am I doing wrong?? OR is it Proliant secific.

6 replies

by cg it

sounds like the BIOS isn't set to boot from the SCSI array.

by inconfigall

Yes, we were using smart start, configured mirror thru ACU in smart start CD. Tried boot priority to arry card. During initial install, mirrored drive is recognied as C: by windows. After reboot,also during W2K3 installation, no boot drive.

by cg it

not sure what to suggest if your using the install discs. Should work.

only idea would be to visit HPs site and see if there is anything in their KB articles on it.

by anandgjha

Use the SmartStart CD which comes alongwith the server. Boot the Server with the SmartStart CD and configure your RAID after the RAID installation is completed then SmartStart CD will ask for the respective OS to be installed.Insert the OS CD and start of with the OS installation.................

by mahfuj.robin

hey, im also having this problem. im using G4. i installed win 2k3 with startsmart. but windows cant boot frm hdd. so what i can do?

This discussion is closed to new replies.