5 replies
by arg cio
There is a usually a sticker on the on the chip that states if it is PC100, or PC133. No sticker, might mean PC66.
Also, on the individual chip, there is usually a mark for it's speed capability in nanoseconds. 10-12u is PC66 (might work at 100Mhz) 8- 9u is PC100 (might work at 133), and 6-7 is PC133. (These are for DIMMS/SDRAM ONLY!)
If you look at enough memory chips, you will learn how to read what speed the individual chips are set at. sometimes it is the last number with a -X (sometimes has a S or u after it).
good luck, and hope this helped!
by rapaznovo
by cajundon
No really, because each manufacture labels there memory modules differently. Generic manufactures rarely put any information or stickers on the memory modules, or if it is a parity or non-parity, EDO, or bus speed.
You need to know what manufacture of the motherboard, and memory module that is required to replace or increase memory. You would be better off paying a couple dollars more for a reliable manufacture of memory modules, like Pony, Kingston, or MircoPC.
by rapaznovo
by rapaznovo
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending