Discussion Locked

Recovering Data in Software Raid Envmt

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Without losing data, how can I recover a 4 drive system when using NT Raid. <>

9 replies

by ann777

This is RAID 5... Usually, you install the new replacement hdd and then run a "recovery or rebuild" process through the RAID controller. You should refer to the specific instructions that you got with your RAID card. Each manufacturer may have a different process.

by ann777

Sorry, i skipped a step. You will need to format/initialize the drive (through the RAID controller as well) before running the recovery/rebuild.

by todd

Read comments to Anna for additional details: also please reread the question.
Thanks

by bhrdwh

NT Raid - you mean software Raid, Yes, if you've got hot pluggable drive...
1. simply take out the faulty drive (while the server is running).
2. Put the new /ok drive in its place.
3. From your Start-Programs-Raid Config -
run format the disk & run recreate RAID
partition.
Thats all !!

by todd

Read comments to Anna for additional details: also please reread the question.
Thanks

by todd

To Anna:
I am not sure you understood the question.. Drive 0 the system drive is bad not the Drives with Software Raid in NT... Again not hardware raid but software raid in NT. NT System and Boot info on Drive 0 is not part of mirror or raid and it is the one that is bad. Thanks

by todd

I fixed the problem... I purchased and used ERD Commander by Wininternals. I had to boot up in command line mode, copy the repair folder to diskette, remove the nimda worm manually (the whole cause of this mess), and manually copy the missing or corrupt files from a service pack cd. It took hours! Then I ran emergency repair several times. Reloaded SP6a once the machine would let me login. Reloaded disk config from Disk Administrator and everything started working.
I then had to reload SQL 7 and its SP. ERD Commander is worth the purchase!!!

This discussion is closed to new replies.