Question Locked

Remote Desktop Connection

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a desktop PC at home with XP pro. It has a NIC card and a wireless NIC card. It has 2 IP addresses XXX.XXX.0.XX3 and XXX.XXX.0.XX2. I also went to http://whatismyipaddress.com/ and got a different ip with a totally different format XX.XXX.XXX.XXX. When I am at home, and connected to the network there with a win XP home laptop. I can connect to the desktop using Remote Desktop Connection. and XXX.XXX.0.XX3 as the IP.
Here is the problem: When I take my laptop to my office, I can't connect. I'm pretty sure I need to change the IP. I'm sure its something pretty simple since I have connected at home. Please help, someone.

5 replies

by jshilling

I dont know what to do to make that work right, however i use LogMeIn, its free remote desktop software. logmein.com click free, install on both machines and you should work fine. hope this helps, and sorry i couldnt tell you how to actually fix the problem.

by ludicrous0909

Basically when you are at home you are probably getting some kind of 192.168.0.103 and 192.168.0.102 those are INTERNAL addresses only. That means you only get those addresses when you are inside your home network. when you went to http://whatismyipaddress.com/ and got a different address that is your OUTSIDE address or the real world address.

If you are wanting to connect to a home PC while at work you need to remote desktop to your OUTSIDE address. Initially this will not work until you tell your router that it needs to forward port 3389 (the port remote desktop uses) to whatever machine you are want to take over. (192.168.0.103/102)

If you do that it should work. But by no means did i say it was safe.

by adminadmin

why is this not safe?
what would be more safe?
How do I "tell your router that it needs to forward port 3389 to 192.168.0.103?"

by jplconsultant

At some point, you're probably going to get a new IP Address from your ISP (new "outside address", to use the terminology of the previous post). Odds are you won't know it changed. When you then try to remote access, it will fail, since you're no longer connecting to your computer at home.

Check out http://www.dyndns.com

In short, you run a little software on your home computer and it keeps up with your IP Address (outside address). It then associates this address to something you can easily remember, like MyBigBadComputer.dyndns.com.

Now, all you have to do is use this one line to connect and the system points you to the right IP Address.

Check out the site for details. It's a free service.

JPL()

This discussion is closed to new replies.