Discussion Locked

Remote synchronize problems.

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I?m currently running a Windows NT 4.0 domain at two different sites. The second site has just been brought up and is connected by a Point-to-Point connection with Cisco routers. At the second site I have installed a BDC with DHCP and WINS. As ofnow I can ping successfully from my primary location to my BDC at my secondary location. Also, I can ping my primary location from my secondary location. With this I know my tunnel has been created and is working fine. However, when I log onto the secondary sites BDC I?m not being validated by my PDC at the primary site. Also, when I browse network neighborhood at the secondary site I can only see myself. On my PDC through server manager I try to connect to the BDC at the secondary sit and I get ?The network path is not found? error. My question is am I missing some setting in NT that is not allowing me to synchronize with my BDC and the remote site? The error at the remote site I?m getting is Event ID 5719 netlogon
No WindowsNT Domain Controller is available for domain domain name.
The following error occurred:
There are currently no logon servers available to service the logon request.

5 replies

by tony.colgrove

Do you have WINS configured properly? If you have a WINS server on each segment you need to configure PUSH/PULL between them.
Also make sure clients are registering with their local WINS server first.
Using an LMHOSTS on the DC's with addresses to each other will help greatly also.

by james_randy

If you are still tackling this problem, perhaps you should consider calling your local super-hero.

This discussion is closed to new replies.