9 replies
by map6551
Unless you have some sort of image e.g. Symantec Ghost to load over top of NT the only way to get rid of NT is to FDISK and reformat the drive.
Hope that helps
Mark
by chris.riley
by viperxx
by chris.riley
by ian mclaws
Yes, there certainly is, Chris. You are missing quite a bit of info in your question, but here goes:
1. If you are using NTFS, you can convert the drive with no loss of data to Fat32 or 16 with utilities such as Partition Magic. Be careful, though.You must choose FAT16 if you have not already got Win98 on your system as a dual boot, or NT won't start! Don't worry, you'll change it to FAT32 soon...
2. Once the drive is running FAT16, (if it is not dual boot with Win98 already), put the Win 98CD in and load it, normally. This will install 98 and will re format the MBR so that the system is no longer booting NTLDR. If the system already runs 98 (dual boot), then just start in 98, go to a DOS prompt, and run sys C: to restore the boot sector to a 98 boot.
3. Simply delete all Winnt files.
Good luck, and let me know if you need some help before you try (peer mail)
Ian
by ian mclaws
by ian mclaws
by chris.riley
by chris.riley
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending